1·A novel algorithm for fitting surface reconstruction of unorganized data points is presented in this paper.
给出了一个新的散乱数据的曲面重建算法。
2·The automatic creation of disassembly direction is key problem of disassembly analysis, depended on the fitting surface of assembly parts.
拆卸方向的自动生成是拆卸分析中的重要问题，它仅依赖装配体的配合面。
3·To enhance the triangle quality of the simplified mesh, a novel triangular mesh simplification algorithm based on local polynomial fitting surface of vertices was proposed.
为了提高网格简化后的三角形质量，提出了一种新的基于顶点局部多项式曲面拟合的三角网格简化算法。
4·By grinding the fitting surface, fatigue surface of the fitting surface was removed, the fitting surface was coated again. The aim of renovating the grinding shaft was achieved at the end.
通过磨削去除轴径的疲劳层，再进行表面涂镀修复，最终达到修复砂轮主轴的目的。
5·This is achieved in a variety of ways, but essentially involves creating a raised groove or area along the posterior border, on the fitting surface. This is often referred to as the postdam.
这可以通过多种方式达到，但基本上不外乎，在基托组织面沿后缘制作一个突起的沟或区域，这就是常提到的后堤。
6·Mimas, one of Saturn's innermost moons, was another of Cassini's targets--which is fitting because Mimas looks rather like a bulls-eye, thanks to the huge circular crater on its surface.
土卫一“米玛斯”是土星最里面的卫星之一，也是“卡西尼”号的一个重点观测目标。 由于表面的巨大环形陨坑，土卫一看上去好似一只牛眼。
7·The point cloud segmentation is an extremely essential step in the reverse model design. The segmentation results will affect the surface fitting and the CAD model reconstruction quality directly.
数据点云分块是逆向工程中一个非常关键的环节，测量数据的分块结果将直接影响到曲面拟合及CAD模型重建的质量。
8·Next, in the interior of the patches, surface fitting points and cross boundary derivatives are estimated from the reference curves by constructing virtual iso-parametric curves.
其次，在曲面片内部，曲面拟合点和边界方向导数可以从参考曲线中通过构建虚拟等参线的方法得到。
9·Be able to label and read surface roughness codes, codes of size tolerance and fitting, and geometrical tolerance codes.
会正确注写和识别表面粗糙度代号，尺寸公差与配合代号，形位公差代号。
10·There are some shortages in these methods, resulting in a certain error between the fitting result and the true temperature of the object surface.
这些处理方法自身都存在一定的缺陷，使得拟合结果与物体表面真温之间存在一定的误差。