1·A new error compensation method is introduced.
改进了误差补偿方法。
2·The error compensation of test data is achieved with the least square method.
最后基于最小二乘法原理实现了测试数据的误差补偿。
3·To measure rotation error correctly is requisite of realizing error compensation.
正确测量机床主轴误差运动是实现加工误差补偿的前提。
4·Various compensation programs were studied based on error compensation way of software.
基于软件误差补偿方法，研究了各种补偿方案。
5·Meantime, an algorithm to the error compensation of the tooth clearance is implemented.
同时，阐述了实现齿隙误差补偿的软件方法，并采用软件方法加以实现。
6·The micro compensation device for the boring cutter is the key technique to realize error compensation.
镗孔刀具微量补偿装置是实现误差补偿的关键技术之一。
7·On the basis of above research, the measuring error compensation method for free-form surface is proposed.
在此基础上，进一步提出了自由曲面测量误差的补偿方法。
8·This paper introduces a new technique of nonlinear error compensation: the continuous analogue compensation.
提出一种新的模拟信号非线性校正技术——连续模拟补偿法。
9·Autofocus generally encompasses two distinct steps, i. e. phase error estimation and phase error compensation.
自聚焦主要由两个重要步骤组成，即相位误差估计和相位误差校正。
10·To validate the validity of the algorithm, the simulating example of the error compensation on sensor was given.
为了验证算法的有效性，给出了传感器误差补偿实例。