1·The metal particles removed from the die block are washed away with the dielectric fluid which is circulated.
从模块上去除地金属屑被循环流动地电火花加工液冲走。
2·The metal particles removed from the die block are washed away with the dielectric fluid, which is circulated.
从模块上去除的金属屑被循环流动的电火花加工液冲走。
3·Locks SPAR E23 is a solvent refined hydrocarbon distillate, which is specially designed for erosion dielectric fluid.
洛斯斯霸e23是经由溶剂精炼的碳氢馏份，特别适合作火花电蚀液使用。
4·The ensuing minute metal chips are removed by melting and vaporization, and are washed away by the continuously flushing dielectric fluid.
随后分钟金属芯片熔化和汽化去除，并不断冲刷冲洗介质流体了。
5·A solar wafer slicing method was studied, which was based on complex dielectric fluid and efficiency electric discharge machining (EDM) and electric chemical machining (ECM) technique.
提出了一种基于复合工作液的、以电火花电解复合加工技术对太阳能硅片进行切割的工艺方法。
6·A new excluding method of debris using the rapid flow due to evaporation of dielectric fluid when discharging was proposed and the EDM characteristics of the method were experimentally discussed.
根据放电时产生的加工液沸腾、气化膨胀引起放电通道周围加工液快速流动的原理 ，提出了一种新的排屑方法 ，系统地研究了使用该方法的放电加工特性。
7·We think the change of the structure and dielectric property of er fluid are the main cause of the fact that the transmittance could be adjusted under the external electric field.
分析认为在外加电场作用下，电流变液结构转变和介电性能的变化是导致微波透射率可调控的主要原因。
8·It works in conjunction with the electric potential, electric charge and dielectric models, and requires a positive electrical conductivity of the fluid.
资讯科技和电位，电荷和介质模型一起工作，而且需要液体的一个积极导电系数。
9·Electrical charge is generated at free surfaces and walls due to the differences in dielectric properties of the fluid, void and solid components.
电的进气由于不同在液体，无效和固体结构的诱电性特性中的免费表面和墙壁被产生。
10·Application Working fluid (dielectric) for electrical descharge metal working.
用途作为火花机电蚀工序的绝缘工作液。