1·The thermal cycling test of divertor target plate was carried out in the vacuum;
在真空室中用大功率电子束作为热源进行了热疲劳试验。
2·In this paper, using ground-based simulation facilities, the vacuum thermal cycling test was carried out on the epoxy construction adhesive.
本文利用空间环境效应地面模拟设备对环氧结构胶粘剂进行了真空热循环试验。
3·Finally, a thermal cycling test completed in vacuum on a carbon fibre parabolic antenna reflector is also deseribed, and the results of the measure…
最后进行了碳纤维抛物面天线反射器的真空冷热交变试验。
4·The paper discusses the importance and implementation of various types of thermal tests (thermal balance test, thermal vacuum test and thermal cycling test) during the spacecraft development phase.
论述了各种类型热试验(热平衡试验、热真空试验、热循环试验) 在航天器研制中的重要性及它们的做法要点。
5·Test results indicated that the dry-wet cycling was the main factor of the problem.
结果发现,干湿循环是导致这一问题产生的根本原因。
6·SRM system was applied to the tracking test in the different phases of the track specific training of the 6 cyclists of Shanghai Cycling Team.
应用场地SRM系统对上海自行车队重点队员6人的场地专项训练分阶段进行跟踪测试,以便筛选有效指标评价短距离自行车主要专项能力。
7·Using this model the permanent distortion and work life in long term under thermal cycling can be predicted based on a few test data.
利用该模型,根据少量试验数据可预示长期冷热循环下的永久变形或工作寿命。
8·The virtual user continues cycling through the tests in this order until the load test is complete.
虚拟使用者会继续按照此顺序进行测试循环,直到负载测试完成为止。
9·This paper analyzes the influence of the test device cycling characteristic for fluid dynamic characteristic on the pulsation pressure measurement in seawater pipeline system.
分析了流体动态特性实验台架本身的自循环特性对海水管路系统中脉动压力测量的影响。
10·The thermal fatigue test was performed on 316 SS to understand the crack propagation behavior underthe cycling temperature environment.
从实用出发对316不锈钢管材进行了热循环下的裂纹扩展试验。