1·With a designed elastic cutter bar, we use the vibration cutting method and have produce the cast fiber steadily and successfully.
我们设计了弹性刀杆,采用振动切削的方法,成功稳定地生产出铸铁纤维。
2·The new drive mechanism for the double knife cutter bar of self propel Combine harvester with rubber crawlers have been development.
研究设计了往复式切割器新型驱动装置,用于全喂入稻麦联合收割机双动刀切割器。
3·The cutter bar efficiently cuts its way underneath the track, where it removes fouled ballast and deposits the spoil into the digging wheel.
刀杆可在铁轨下方进行有效切挖,同时也可移除脏污道砟,并将其存放到挖掘圆盘上。
4·All morning you could hear the rattle of the machine as it went round and round, while the tall grass fell down behind the cutter bar in long green swathes.
整个上午你都能听到割草机发出轰鸣声,在田地里绕来绕去,那些高高的草在它后面倒成一条长长的绿色通道。
5·The technical equipment adopted the construction that the spindle drove boring sleeve, boring bar and cutter bar in order to finish machining spherical surface. The improved result was good.
该工装采用主轴带动镗套和镗杆及刀杆的结构来完成球面加工的切削运动,已取得了良好的使用效果。
6·The utility model comprises blades, guide blocks, a cutter body and a tool bar.
本实用新型由刀片、导向块、刀体和刀杆组成。
7·If serious deformation is occurred, the manual operated cutter or gas cutter to be used for correction to ensure the re-bar end surface perpendicular to the axis.
如有严重变形时应用手提切割机切割或用气焊切割、矫正,以保证钢筋端面垂直于轴线。
8·It has improved the accuracy and the speed of tool setting. At the same time, a tool setting approach with standard test bar touching cutter was introduced.
为改进对刀精度及速度,设计了标准试棒碰刀对刀的方法。
9·This paper is based on previous theory and practical design After the review of machining methods various metal bar straightening machines and twisting machines, this new cutter is now being studied.
本文是在前人研究的理论和实际设计的基础上进行的,在对各种钢筋校直机及钢筋自动弯曲机进行深入探索后,开始新型钢筋自动成型加工机的研制。
10·A set of acceleration test system of elbow-bar framework is founded for the material test of MW1050 automatic blocking die-cutter while it is load-off or not.
建立了一套肘杆机构活动平台加速度测试系统,对MW1050自动烫印模切机空载状态和加压工作状态进行了实测。