1·Examples are call setup time, TPS etc.
例如调用启动时间，TPS等等。
2·Examples are call setup time, TPS etc. This may be taken from requirements book.
确定要测量的参数。例如调用启动时间，TPS等等。这些可以从需求说明书中得到。
3·The call setup time will depend upon various factors, which need to be identified.
该调用启动时间的长短决定于多个需要确定的因素。
4·For the call setup time requirement, the tool is run under various load conditions and different setups and measurements are noted down.
对于调用启动时间需求的测试，测试工具将在各种各样的载入条件下运行，不同启动和测量结果将被记录下来。
5·After thorough analysis of the Cisco's IP-based Lawful Interception architecture and combined with SIP call setup flow, it is introduced into the NGN.
该文通过分析思科提出的基于IP网络的合法监听架构并结合SIP呼叫建立流程的特点，将该架构扩展到下一代网络中。
6·SIP supports five facets of establishing and terminating multimedia communications: user location, capabilities and availability, call setup and call handling.
SIP支持建立和终止多媒体通信的五个方面：用户定位、能力与可用性、通话建立和通话处理。
7·SIP is currently the basic signaling and call setup protocol for IP telephony, and SIP applications are the basic way to provide voice and other multimedia services over IP.
SIP是当前IP电话的会话建立和信令控制的基础协议，SIP应用也是实现基于IP网络的语音等多种多媒体应用的基本途径。
8·In reference to the call setup time requirement, the tools and scripts required for generating the load level and also for measuring the setup time are developed in this phase.
谈到调用启动时间的需求，为生成载入标准以及测量启动时间所需要的工具和脚本需要在该阶段开发。
9·Channelization code management can increase the throughput, decrease the blocking probability of call setup requests, and reduce the signal Peak to Average Power Ratio (PAPR) in 3g systems.
合理的信道化码资源管理策略设计可以提高3g系统的吞吐量、降低用户的呼叫阻塞率和降低信号的峰平功率比。
10·Signaling messages such as supervisory messages for call setup, query and reply and traffic control, will be routed through the signaling links from one SS7 node to another SS7 node in the network.
可通过 信令链路将 信令消息，比如用于呼叫建立、 查询和应答监控消息以及话务量控制， 从网络中的一个 SS7 节点路由到另一个 SS7 节点。