1·The actual stress is not proportional to the bending moment.
实际上应力与弯矩不成正比。
2·Fulcrum of System Yields to a Bending Moment, Thus Spring Effect.
系统内的一个支点产生一个弯矩效果，等效于弹簧效果。
3·The effect of PPR on the redistribution of bending moment was discussed.
讨论了部分预应力比PPR对连续梁内力重分布的影响；
4·With the increase of bending moment, the stress of femur increases evidently.
随着弯矩的增加股骨的应力有明显增加。
5·The all-bending moment equation for dual continuous beam is derived on this basis.
并在此基础上，导出计算曲轴的双连续梁全弯矩方程。
6·If the stress produced by the additional bending moment is too large, the bolt will break.
如果附加弯矩产生的应力过大，螺栓便会断裂。
7·The basic way that verifies whether bending moment diagram is correct is derivative judge.
弯矩图是内力图的一种，检验弯矩图正确与否的基本方法是导数的几何意义判定法。
8·Bending moments produced by lift generally have only a small effect on the resultant bending moment.
一般由升力所产生的弯矩对最终的弯矩只有很小的影响。
9·The geometric stiffness matrix is composed by the effect of axial force, bending moment and bimoment.
其中几何刚度矩阵由轴向力、双向弯曲和截面翘曲的影响组成。
10·This makes the bolt bear the preload and work load, but also bear the role of additional bending moment.
这使螺栓在承受预紧力和工作载荷作用的同时，还要承受附加弯矩的作用。