1·We summarized the particular character of this type submarine, that is the TS in abeam is higher than other bearing and bearing angle departure abeam degree also has intense echo.
总结出该型潜艇呈现的独特特征是正横方位目标强度大大高于其它方位，偏离正横的某一方位角也有强烈的回波。
2·A pitch controller rotates each blade around a bearing, setting it to the best angle for the wind speed.
同时间距控制装置会根据风速旋转安装在轴承上的风叶，保持在最佳角度。
3·TAPER: any surface of any bearing part that is not the correct Angle or not to print.
锥度：任何轴承部件的表面角度不正确或者不符合图纸要求。
4·The raceways of both the inner and outer rings of this bearing type are made with a set contact Angle.
双方的这种类型的轴承内圈和外圈的滚道是由一组与接触角。
5·To avoid sliding that occurs in cylindrical roller thrust bearings, the taper Angle of the rollers is selected so the extended contact lines intersect on the bearing axis.
为了避免推力圆柱滚子轴承发生滑动，滚子的锥度要合适以至于扩大的接触线可以与轴承轴相交。
6·It can measure the oil film thickness, oil temperature, crank Angle, speed, journal center locus and minimum oil film thickness of main bearing in diesel engine.
该系统可测量内燃机主轴承的油膜厚度、油膜温度、曲轴转角、转速、轴心轨迹和最小油膜厚度。
7·The horizontal Angle of the observer's bearing in surveying, measured clockwise from a referent direction, as from the north, or from a referent celestial body, usually Polaris.
方位角观察者通过测量所具有的水平角度，从某一参考方向顺时针测量，如从北部或从参考天体处，通常从北极星。
8·Universal set of technology, make precision machine tool spindle use Angle contact ball bearing realized either way matching use.
万能组配技术，使精密机床主轴用角接触球轴承实现了任意方式的配对使用。
9·As the core parts for high speed spindle, the dynamic properties of Angle contact ball bearing has important effect on cutting performance and machining precision of whole machine.
角接触球轴承作为高速主轴的核心部件，其动力学特性对整机的切削性能和加工精度有重要的影响。
10·Under different Angle lean-state, the initial drawback makes a marked effect on buckling bearing capacity of piston.
活塞在不同倾斜度下，初始缺陷对活塞屈曲承载力的影响较大。